Edge Blade - Blade Lighting

endcap
	» Endcap dimension is additional to building block dimension. » Endcap uses internal fixing method – no visible fixings.
straight joiner
	» 2 pieces of extrusion are abutted and are joined internally by plates that fix into the side wall channels.
90 degree bend
	» Bends are made from blank extrusion. » The bend is joined to the Edge Blade system by the use of the straight joiner component. » Other angles are available on request.
suspensions
	» Chrome ceiling cone with wire » Standard suspension lengths are 1000mm, 2000mm, 4000mm and are adjustable on site. » Fixed suspension points will be advised at the time of manufacture. » Recommended maximum distance between suspensions is 2000mm. » Recommended maximum distance of a suspension from a join is 300mm.
blank extrusion
	» Length to client specification (based on the maximum extrusion length of 3600mm). » Supplied with aluminium lid or ice diffuser.
cable base & cable
	» Cable base comes in brushed aluminium. » Cable colour: clear. » Cable available in 3, 4, or 5 core (please specify the length). » Specify cable entry position on fitting. If not specified, cable entry will be 200mm from one end in suspended fittings, or centre of side for wall mounted versions.