Micro Blade - Blade Lighting

about blade| catalogue| portfolio| FAQ| contact us| home

Micro Blade

Overview Micro Blade Portfolio Lighting & Mounting Options Components Building Blocks, Photometric Data & Installation Instructions

endcap
	» Endcap dimension is additional to building block dimension. » Endcap uses internal fixing method – no visible fixings.
straight joiner
	» 2 pieces of extrusion are abutted when joined by plates that fix into the side wall channels.
90 degree bend
	» Bends are made from blank extrusion and lid. » Other angles are available on request. » The bend is joined to the Micro Blade system by the use of the straight joiner component.
suspensions
	» Chrome ceiling cone with wire. » Standard suspension lengths are 1000mm, 2000mm, 4000mm and are adjustable on site. » Fixed suspension points will be advised at time of manufacture. » Recommended maximum distance between suspensions is 2000mm. » Recommended maximum distance of a suspension from a join is 300mm.
blank extrusion
	» Length to client specification (based on the maximum extrusion length of 3600mm). » Supplied with aluminium lid or ice diffuser.
recess cowling – downlight option 1
	» The cowling forms a channel in the ceiling that acts as a plastering guide and fixing for the Micro Blade extrusion when recessing. The channel formed provides a 6mm negative detail along sides and 6mm at each end of the Micro Blade. » Cowling must be installed at time of ceiling construction. » Maximum cowling length is 1800mm. Pieces can be joined on site. » Please refer to your Blade representative for further information.
recess plaster box – downlight option 2
	» The plaster box forms a channel in the ceiling that acts as a plastering guide and fixing for the Micro Blade extrusion when recessing. The plaster box provides a 6mm negative detail along sides and 6mm at each end of the Micro Blade » Plaster box must be installed at time of ceiling construction. » Maximum plaster box length is 2400mm. Pieces can be joined on site. » Please refer to your Blade representative for further information.
recess plaster box – wall light
	» The plaster box forms a channel in the ceiling that acts as a plastering guide and fixing for the Micro Blade extrusion when recessing. The plaster box provides a 6mm negative detail along sides and 6mm at each end of the Micro Blade » Plaster box must be installed at time of wall construction. » Maximum plaster box length is 890mm. Pieces can be joined on site. » Please refer to your Blade representative for further information.
cable base & cable
	» Cable base comes in brushed aluminium. » Cable colour: clear. » Cable available in 3, 4, or 5 core (please specify the length). » Specify cable entry position on fitting. If not specified, cable entry will be 100mm from one end.