endcap |
|
- » Endcap dimension is additional to building block dimension.
- » Endcap uses internal fixing method – no visible fixings.
|
|
straight joiner |
|
- » When 2 pieces of extrusion are joined, the join is expressed by a 3mm negative detail.
- » They are joined by spigots and the negative detail is covered by the internal cover plate.
|
|
90 degree bend |
|
- » Bends are made from blank extrusion.
- » Other angles are available on request.
- » The bend is joined to the Razor Blade system by the use of the straight joiner component.
- » The angle is expressed by a 3mm negative detail.
|
|
suspensions |
|
- » Chrome ceiling cone with wire
- » Standard suspension lengths are 1000mm, 2000mm, 4000mm and are adjustable on site.
- » Suspensions can be positioned anywhere along the length of the extrusion but the ceiling cone must be into solid fixing.
- » Recommended maximum distance between suspensions is 2000mm.
- » Recommended maximum distance of a suspension from a join is 300mm.
|
|
wall bracket |
|
- » Wall bracket can be fixed anywhere along the length of extrusion but must be into a solid fixing.
- » Extrusion is 10mm off the wall.
- » Recommended maximum distance between wall brackets is 1800mm.
- » Razor Blade is supplied with a single lamp as standard when .
- » Wall bracket is supplied with a cover plate.
|
|
blank extrusion |
|
- » Length to client specification (based on the maximum extrusion length of 3600mm).
|
|
cable base & cable |
|
- » Cable base comes in brushed aluminium.
- » Cable colour: clear.
- » Cable available in 3, 4, or 5 core (please specify the length).
- » Specify cable entry position on fitting. If not specified, cable entry will be 120mm from one end.
|
|
Overview
Razor Blade Portfolio
Lighting & Mounting Options
Components
Building Blocks, Photometric Data & Installation Instructions
