endcap |
|
- » Endcap dimension is additional to building block dimension.
- » Endcap uses internal fixing method – no visible fixings.
|
|
straight joiner |
|
- » 2 pieces of extrusion are abutted when joined.
- » They are joined by a spigot that slides into the suspension channel. A joining plate highlights the join detail.
- » Single, double and triple Sector Blade units can be joined.
|
|
suspensions for single, double & triple sector blade |
|
- » Chrome ceiling cone with wire
- » Standard suspension lengths are 1000mm, 2000mm, 4000mm and are adjustable on site.
- » Suspensions can be positioned anywhere along the length of the extrusion but the ceiling cone must be into solid fixing.
- » For single and twin Sector Blade, the recommended maximum distance between suspensions is 2000mm. For triple Sector Blade allow for 1200mm maximum spacings.
- » Recommended maximum distance of a suspension from a join is 300mm.
|
|
chandelier suspension |
|
- » Ceiling rose with rod suspension (powder coated to match Sector Blade).
- » Rod is self correcting and is suitable for raked ceilings up to 20 degrees.
- » Rod length to client specification with a maximum length of 3600mm.
|
|
wall bracket |
|
- » Fixed wall bracket points will be advised at time of manufacture.
- » Recommended maximum distance between wall brackets is 1200mm.
- » Wall bracket must be into solid fixing.
- » Wall bracket can be mounted up or down.
|
|
blank extrusion |
|
- » Length to client specification (based on the maximum extrusion length of 3600mm).
- » Supplied with ice diffuser.
|
|
cable base & cable |
|
- » Cable base comes in brushed aluminium.
- » Cable colour: clear.
- » Cable available in 3, 4, or 5 core (please specify the length).
- » Specify cable entry position on fitting. If not specified, cable entry will be 200mm from one end.
|
|
Overview
Sector Blade Portfolio
Lighting Options
Ordering Codes
Photometric Data & Installation Instructions
