Slice Blade - Blade Lighting

endcap
	» Endcap dimension is additional to building block dimension. » Endcap uses internal fixing method – no visible fixings.
straight joiner
	» 2 pieces of extrusion are abutted when joined. » They are joined internally by plates which are grub screw fixed.
90 degree bend
	» Bends are made from blank extrusion. » Other angles are available on request. » The bend is joined to the Slice Blade system by the use of the straight joiner component.
suspensions
	» Chrome ceiling cone with wire » Standard suspension lengths are 1000mm, 2000mm, 4000mm and are adjustable on site. » Suspensions can be positioned anywhere along the length of the extrusion but the ceiling cone must be into solid fixing. » Recommended maximum distance between suspensions is 2000mm. » Recommended maximum distance of a suspension from a join is 300mm.
wall bracket for systems
	» Fixed wall bracket points will be advised at time of manufacture. » Extrusion sits 6mm off the wall. » Recommended maximum distance between wall brackets is 1800mm. » Wall bracket must be into solid fixing.
blank extrusion
	» Length to client specification (based on the maximum extrusion length of 3600mm).
cable base & cable
	» Cable base comes in brushed aluminium. » Cable colour: clear. » Cable available in 3, 4, or 5 core (please specify the length). » Specify cable entry position on fitting. If not specified, cable entry will be 200mm from one end.