Slot Blade - Blade Lighting

Overview Slot Blade Portfolio Lighting & Mounting Options Components Building Blocks, Photometric Data & Installation Instructions

standard endcap
	» Endcap dimension is additional to building block dimension. » Endcap uses internal fixing method – no visible fixings.
ip55 endcap (interior only)
	» IP55 endcap requires an extra 28mm of extrusion for internal endcap fixing bracket.
90 degree bend
	» Bends are made from blank extrusion and lid. » Other angles are available on request. » The bend is joined to the Slot Blade system by the use of the straight joiner component. » Can't be used for IP55 fittings.
suspensions
	» Chrome ceiling cone with wire. » Standard suspension lengths are 1000mm, 2000mm, 4000mm and are adjustable on site. » Suspensions can be positioned anywhere along the length of the extrusion but the ceiling cone must be into solid fixing. » Recommended maximum distance between suspensions is 2000mm. » Recommended maximum distance of a suspension from a join is 300mm.
wall bracket
	» Wall bracket can be fixed anywhere along the length of extrusion but must be into a solid fixing. » Recommended maximum distance between wall brackets is 1200mm. » Extrusion sits 6mm off the wall.
recess cowling – downlight option 1
	» The cowling forms a channel in the ceiling that acts as a plastering guide and fixing for the Slot Blade extrusion when recessing. The channel formed provides a 6mm negative detail along sides and 6mm at each end of the Slot Blade. » Cowling must be installed at time of ceiling construction. » Maximum cowling length is 1800mm. Pieces can be joined on site. » Please refer to your Blade representative for further information.
recess plaster box – downlight option 2
	» The plaster box forms a channel in the ceiling that acts as a plastering guide and fixing for the Slot Blade extrusion when recessing. The plaster box provides a 6mm negative detail along sides and 6mm at each end of the Slot Blade » Plaster box must be installed at time of ceiling construction. » Maximum plaster box length is 1485mm. Pieces can be joined on site. » Please refer to your Blade representative for further information.
recess plaster box – ceiling washer
	» The plaster box forms a channel in the ceiling that acts as a plastering guide and fixing for the Slot Blade extrusion when recessing. The plaster box provides a 6mm negative detail along sides and 6mm at each end of the Slot Blade » Plaster box must be installed at time of ceiling construction. » Maximum plaster box length is 1200mm. Pieces can be joined on site. » Please refer to your Blade representative for further information.
recess plaster box – wall washer
	» The plaster box forms a channel in the ceiling that acts as a plastering guide and fixing for the Slot Blade extrusion when recessing. The plaster box provides a 6mm negative detail along sides and 6mm at each end of the Slot Blade » Plaster box must be installed at time of wall construction. » Maximum plaster box length is 1200mm. Pieces can be joined on site. » Please refer to your Blade representative for further information.
straight joiner
	» 2 pieces of extrusion are abutted when joined. » They are joined by 2 spigots that slide into the suspension channels. Internally the 2 pieces of extrusion are joined by plates that fix into the side wall channels. » Can't be used for IP55 fittings.
blank extrusion
	» Length to client specification (based on the maximum extrusion length of 3600mm). » Supplied with aluminium lid or ice diffuser.
cable base & cable
	» Cable base comes in brushed aluminium. » Cable colour: clear. » Cable available in 3, 4, or 5 core (please specify the length). » Specify cable entry position on fitting. If not specified, cable entry will be 188mm from one end or centre of side for wall mounted versions.